SKU: 150786

1. Smith And Wesson Model 34 Serial Number Lookup 2327976
2. Smith & Wesson Model 34 Serial Number Lookup

M&p shield ez pistol important safety recall notice for pistols manufactured between march 1st, 2020 and october 31st, 2020 learn more. Please enter the serial number below. Please enter the serial number below. The Smith & Wesson Model 10, previously known as the Smith & Wesson.38 Hand Ejector. Serial numbers for the Military & Police ranged from number 1 in the series to 20,975. Most of the early M&P revolvers chambered in.38. World Guns page Smith & Wesson Model 10 at the Internet Movie Firearms Database.

• Weight: 34.4 oz / 975.2g

Smith & Wesson.22/32 Kit Gun Pre-Model 34 Double Action Revolver Serial Number 20002 with BoxManufactured from 1953 to 1969. It has a serrated ramp front sight with orange insert, adjustable notch rear sight, matching numbers on butt, right grip panel, barrel and cylinder, and 4-screw frame. The factory blue box is numbered to the gun. Includes the registration card. Dec 27, 2015 Well the gun was made about 1975 which would make it a Model 14-3 (the next version the 14-4 came out in 1977). 38 smith and wesson serial number lookup, s&w revolver serial number lookup, s&w serial number lookup, s&w serial numbers lookup. Smith and wesson model 686 serial number lookup Jan 28, 2011 418 18 Terre Haute I just bought two model 10 Smiths. One is a 10-5 serial D7461XX. The other is a model 10-6 serial D5801XX. I am curious about year made. Is there a good website I can look up information on these? Thanks guys Feb 15, 2013 10,674 83 IN Call S&W customer service.

Joined Jul 25, 2012. Knowledgeable habits who could support me with the date of manufacture of my 34-1 22 lr with serial number M175666 the truth is that it is practically brand new blue even its finish is 3-centimeter barrel in advance, thanks. A forum community dedicated to Smith & Wesson firearm owners and enthusiasts. No Serial Or Model Number. 00000 n 800-732-3705 Fx. There are many, many other S&W revolvers not covered here.I'll add more if and when the mood strikes me. The left Any info would be appreciated. 00000 n The single strands slide right through the double strands.

Overview

Smith & Wesson makes it possible for you to own a piece of history-in-the-making with these Classic revolvers. They're the finest new handguns possible with designs harkening back to the most famous and collectible guns that Smith & Wesson ever constructed. Each is based on a model known for legendary performance then enhanced with modern advantages. They're the timeless best of both worlds,­ Smith & Wesson Classics.
ALL BACKED BY OUR SMITH & WESSON LIFETIME SERVICE POLICY.
Availability subject to applicable federal, state and local laws, regulations, and ordinances.

Specifications

The Smith & Wesson Model 36 (also known as the Chief's Special Eureka capture vacuum manual. ) is a revolver chambered for .38 Special. It is one of several models of J-frame revolvers. It was introduced in 1950, and is still in production in the classic blued Model 36 and the stainless steel Model 60.

History[edit]

The Model 36 was designed in the era just after World War II, when Smith & Wesson stopped producing war materials and resumed normal production. For the Model 36, they sought to design a revolver that could fire the more powerful (compared to the .38 Long Colt or the .38 S&W) .38 Special round in a small, concealable package. Since the older I-frame was not able to handle this load, a new frame was designed, which became the J-frame.

Smith And Wesson Model 10 Serial Numbers Date

The new design was introduced at the International Association of Chiefs of Police (IACP) convention in 1950, and was favorably received. A vote was held to name the new revolver, and the name 'Chiefs Special' won.^[1][2] A 3-inch (76 mm) barreled version design went into production immediately, due to high demand. It was available in either a blued or nickel-plated finish.^[3] It was produced as the 'Chiefs Special' until 1957, when it then became the Model 36. The 'Chiefs Special' continued to be manufactured as a separate variant.

In 1951, Smith & Wesson introduced the Airweight Model 37, which was basically the Model 36 design with an aluminum frame and cylinder. The aluminum cylinders proved to be problematic and were abandoned in favor of a steel cylinder.^[3]

In 1989, Smith & Wesson introduced the LadySmith variant of the Model 36. This was available with 2 in (51 mm) or 3 in (76 mm) barrel and blued finish. This model also featured special grips designed specifically for women, and had 'LADYSMITH' engraved on the frame.^[4]

Approximately 615 Model 36-6 Target variations were produced. This variant had a 3-inch full lug barrel with adjustable sights and a blued glass finish.

In 2002, Smith & Wesson reintroduced the Model 36 with gold features (hammer, thumbpiece, extractor, and trigger), calling it the 'Model 36 Gold'. The gold color was actually titanium nitride.

In 2005, Smith & Wesson produced the 'Texas Hold 'Em' variant. This was produced with a blued finish, imitation ivory grips, and 24k gold plate engraving.

Smith And Wesson Model 10 Serial Numbers

Many Model 37 variants with a lanyard ring attached were made for Japan. Part of this contract was cancelled, resulting in many of these being sold to a wholesaler, who then re-sold them for civilian use. These entered the civilian market in 2001. In 2006, the Model 37 was dropped from Smith & Wesson's catalog.

Serial number 337 was shipped to J. Edgar Hoover and is engraved with his name.

In 1958, Spanish manufacturer Astra developed a high quality revolver line based on this weapon, under the name of Astra Cadix, Astra 250 and Astra NC6.

Design and features[edit]

Designed to be small and compact, the Model 36 has been produced with 2-inch (1.875 inch actual length) or 3-inch barrels with fixed sights. A version with an adjustable rear sight, the Model 50 Chief's Special Target, was also produced in limited numbers with both 2-inch and 3-inch barrels.

Like nearly all other 'J-frame' Smith & Wesson revolvers, it has a 5-round capacity in a swing-out cylinder, and features an exposed hammer. It features a nickel-plated or blued finish and either wood or rubber grips.

Users[edit]

Smith And Wesson Pre Model 10 Serial Numbers

• Japan: Shipped 5,344 Model 37s in 2003^[5]and additional 5,519 in 2005 for the National Police Agency.^[6]
• Malaysia: From 1970 to 2000, the Model 36 is standard sidearm for plainclothed detective in Royal Malaysian PoliceSpecial Branch or Criminal Investigation Division before Glock 17 adoption. It also used by RELA Corps Medium/Lower Rank Officer (permanent or volunteer) as training or self-defence weapon before the adoption of the Glock 19/26 and HK USP 9mm and is still used until today.
• Malta: It was standard issue for the Mobile Squad in the Malta Police Force until the arrival of the Glock 17 in 2007. They have since then been withdrawn from active carry, but they are still all being kept in the General Police Headquarters in Floriana.
• Norway: Although never a standard service gun in Norway, it is kept in the Norwegian Police Service inventory as a pure self-defensive option, for off-duty officers who meet certain criteria.
• South Korea: In 1974, it was used in the failed attempt to assassinate South Korean president Park Chung-hee, killing his wife Yuk Young-soo instead. Five years later, M36 Chief Special was, once again, used to assassinate Park.
• United States: For many years, the Model 36 was the standard police detective and 'plainclothes man' carry weapon for many police agencies including the NYPD. Many police officers still use it or one of its newer Smith & Wesson descendants as a 'back up' weapon to their primary duty pistol or as their 'off-duty' weapon. For several years in the mid-1970s, the Model 36 was issued to and carried as a duty weapon by administrative and command staff of the NC State Highway Patrol, but it was later replaced when all troopers were required to carry the then duty issue weapon, the S&W Model 66 .357, which was in turn later replaced with the last Smith revolver, the Model 686, before the agency switched to semi-automatics in the early 1990s.

References[edit]

1. ^Ayoob, Massad. Greatest Handguns of the World (Krause Publications, Inc., 2010) p. 208
2. ^Jinks, Roy G. History of Smith & Wesson (Beinfeld Publishing,1977), p. 225.
3. ^ ^abArmed for Personal Defense by Jerry Ahern
4. ^'Standard Catalog of Smith & Wesson' By Jim Supica, Richard Nahas
5. ^'Department of State Letter on May 18, 2003'(PDF). US Department of State. Archived from the original(PDF) on October 16, 2011. Retrieved 2012-02-09.
6. ^'US Department of State Letter on September 6, 2005'(PDF). US Department of State. Archived from the original(PDF) on October 16, 2011. Retrieved 2012-02-09.

External links[edit]

Smith And Wesson Model 10 Serial Number D

A descendant of the .38 Hand Ejector Military & Police Model of 1899, Smith & Wesson’s first swing-out-cylinder revolver to chamber the then-new .38 Special cartridge, the Victory model, was an updated wartime production version introduced in 1942. It was ultimately supplied to every branch of the American armed forces as well as British Commonwealth countries during WWII and continued in production until 1945.

Smith & Wesson is currently marketing a semi-automatic pistol as a Military and Police (M&P) model, but the name is taken from the double action (DA) revolver that made it famous. Later, the same revolver was assigned the model number '10,' when S&W stopped naming their handguns and gave them numbers, instead. The Victory.38 was a wartime version of the original Smith and Wesson Model 10 first introduced in 1899. The gun was variously known as the S&W Military and Police or the S&W Hand Ejector.

By 1942, the Smith & Wesson Military & Police Model 1899 revolver had morphed through several upgrades and modifications to what was then known as the “.38 Hand Ejector Military & Police Model of 1905, Fourth Change.” During those 42-plus years of manufacture, almost 1 million of these medium-framed revolvers were produced. On April 24, 1942, when serial numbers for the M&P series reached 1 million, a new series was initiated, with serial numbers beginning, for the first time, with a letter prefix. The letter “V” was chosen, with the first revolver in the sequence numbered V1. This new series of revolvers was nicknamed the Victory model to signify Smith & Wesson’s hopes for a quick victory and an end to the war.

I just found this on the Smith & Wesson Forum. I guess that makes mine October of 1942 or early November 1942. 'I just received my factory letter and it confirms that Victory revolver number V158896 was shipped on November 20, 1942 to the US Navy, Oakland, CA. Smith & Wesson is currently marketing a semi-automatic pistol as a Military and Police (M&P) model, but the name is taken from the double action (DA) revolver that made it famous. Later, the same revolver was assigned the model number '10,' when S&W stopped naming their handguns and gave them numbers, instead. Let us start with a great gun that just simply shoots bullets – the Smith & Wesson Model 10. Smith & Wesson Military & Police Model 1899 The corner stone for this gun was laid in 1899 with the introduction of the Smith and Wesson.38 Hand Ejector.

Fighting For Victory

Before the United States entered World War II, Smith & Wesson had been producing a variation of the M&P revolver for British Commonwealth nations. Except for its chambering, it was practically identical to the commercial variation in production at the time.

This British version, at their request, was designed to fire the .38 Smith & Wesson round (not the .38 Special), a slightly less powerful cartridge loaded with a heavier 200-grain lead round-nose (LRN) bullet. This round became known as the .38/200, and the revolver built to fire it was known as the .38/200 British service revolver.

Reinventing the Wheel: 10 Elite Revolvers From Smith & Wesson

To meet the needs of the UK’s war effort, from early 1940 until early 1941, most of Smith & Wesson’s revolver production was directed at the manufacture of this variant. These British service revolvers were serialized in the M&P series and were initially supplied with barrels of 4, 5 and 6 inches. Early guns were brightly blued, then brush-polished blued and then sandblasted blued, with those produced later in the run wearing a sandblasted Parkerized finish.

By February of 1941, production of the British service revolver had increased sufficiently to let Smith & Wesson reintroduce the .38 Special-chambered Military & Police revolver. With the United States’ entry into the war in December of 1941, the British version and a U.S. version chambered in .38 Special were produced concurrently, with both models numbered within the new V-prefixed serial number range.

British guns were produced only with 5-inch barrels, and the American version came with a 2- or 4-inch tube. With the war in full force, both models wore a sandblasted Parkerized exterior. Although some early guns were issued with checkered walnut grips with S&W medallions, most had grips made of plain, smooth walnut. All Victory models had square-butt frames, and lanyard rings also came standard. The weight of an unloaded 4-inch-barreled version was 34 ounces.

The revolver’s sights were fixed, with the front consisting of a half-moon blade forged integrally with the barrel, and the rear was a trough milled into the topstrap. The hammers sported narrow, knurled spurs, and the triggers were serrated. Unlike the rest of their Parkerized exteriors, these parts were casehardened.

Making Changes

During its production run, several minor design changes were introduced on the Smith & Wesson Victory model to facilitate increased production and, in one case, improve safety. After production of about 769,000 revolvers in the series, Smith & Wesson incorporated a new hammer-block safety system after receiving reports of a failure with the old system in which a dropped revolver fired.

With the introduction of this new hammer block, the factory changed the prefix on its numbering system from “V” to “VS” to allow for easy identification of revolvers. Partially completed revolvers—those with frames already numbered but of the old style—were upgraded with the new safety system, and an “S” was added to the beginning of their serial numbers, creating a third prefix—“SV”—within the Victory series’ wartime production run.

The last Smith & Wesson Victory model revolver, serial number VS811119, was produced in August of 1945. When Smith & Wesson resumed commercial production of the Military & Police model in late 1945, as the war had been won and the letter “V” was dropped from the serial number prefix. The first commercially produced M&P revolver assembled after war’s end bore serial number S811120.

About 850,000 Smith & Wesson Victory model revolvers of both chamberings were produced. Many of the lend-lease British revolvers found their way back to the United States, where they were rechambered for the more popular .38 Special cartridge. That conversion that didn’t work well because of the slightly larger diameter of the .38/200 round, which left rechambered cylinders somewhat oversized. I owned one of these converted revolvers in the 1970s, and although it was shootable, the spent cases were somewhat bulged and distorted, and the extraction of fired cases was often recalcitrant. For the S&W collector’s sake, I wish they’d have left these guns alone.

Personal Collection

The Smith & Wesson Victory model featured in this article is from my personal collection, where it’s resided since 1984. According to a letter of authenticity obtained from Smith & Wesson historian Roy Jinks, this six-shot revolver was shipped on May 16, 1944, to the U.S. Navy in Virginia. It’s typical in all respects, with its sandblasted Parkerized exterior and plain, unadorned walnut grips.

Although I wouldn’t call its exterior crudely finished, with its telltale mill marks and obvious lack of other surface preparation, it’s recognizable as a wartime production arm. As is typical within the serial number range of the revolver, the left side of the topstrap is marked “U.S. Property,” followed by the initials “G.H.D.,” which is the acceptance mark of Guy H. Drewry, ordnance officer at the time. The initial “P,” a proof marking, appears on the frame, cylinder and the underside of the barrel.

While lacking in aesthetics, this piece functioned smoothly and locked up as tightly as any Smith & Wesson revolver produced today, with minimal side-to-side cylinder play and fore and aft movement present. Its barrel/cylinder gap measured a borderline excessive 0.012 inches, but it had nice, smooth single- and double-action pull weights of 4.5 and 9.25 pounds, respectively.

Though the revolver bears a few mars on its finish and grips, those appear to be more in line with handling and storage dings rather than battle scars. There’s just a shadow of a cylinder drag line, and from that and all other appearances, the gun looks to have been relatively unused and fired little. During my ownership, I had never fired it. But that would soon change.

Shooting Impressions

For much of WWII, the issued round for the Smith & Wesson Victory model (and any other .38 Special firearm, such as the Colt Commando revolver) would have had a 158-grain, full-steel-jacketed, copper-flash-coated bullet in compliance with the established rules of land warfare. From the 4-inch barrel of a Victory, the military loading of that projectile was reputed to travel about 850 fps at the muzzle. A 120- or 158-grain red-tipped tracer round was also standard issue for this revolver at that time, to be used by naval and marine aircrews for emergency signaling.

Not having any period ammunition, I selected two commercial round-nose .38 Special loadings from my ammunition stash: a 150-grain, copper-washed loading from Winchester’s Super-X line, and the other a 158-grain lead-projectile round from Federal. I also acquired a few military loadings to try, but those were head-stamped “RA” and “67,” indicating they were of much more modern manufacture. The loads also used a lighter 130-grain FMC projectile.

With targets set at 20 yards and my chronograph screens at 10 feet, I fired several five-shot groups with the commercial offerings but only two groups with the military rounds because of my limited supply. Groups with all the loadings formed in the 2.25- to 2.75-inch range, with each varying from my point of aim to one degree or another.

The 150-grain Winchester +P rounds hit about 5 inches above and 2 inches right of my hold at 20 yards. Hits with the heavier, slower Federal offering were just as high but well centered. My Victory revolver liked the newer, lighter-bullet Remington military loads the best, hitting quite close to my point of aim from the 20-yard mark. From 7 yards, it was easy to keep a quick six shots fired in double-action mode within the 4-inch bullseye I aimed at. As expected, the old warhorse functioned perfectly throughout the session.

Authentic Leather

Because many of the Smith & Wesson Victory model revolvers were used by U.S. Navy and Marine pilots and crews during WWII, it seemed only natural to showcase it in this article with a modern rendition of the holster it was most often issued with and carried in during the war. Because of the tight confines in military aircraft, the shoulder holster was the primary mode of carry for this weapon, as it kept the gun high, secure and out of the way, yet positioned so access was quick and easy.

El Paso Saddlery makes a superb rendering of this holster for many handguns with barrels from 3 to 8.375 inches long. Called the 1942 Tanker holster, it’s patterned closely after the M3 rig most often associated with this weapon. It’s an across-the-shoulder setup with a 1.5-inch-wide support strap fabricated from saddle-grade leather. This strap is sewn to the holster at one end and secured at the other by a buckle and D-ring, allowing adjustability for various body sizes or types of clothing. The main pouch is formed from one piece of leather folded over and sewn to accommodate the weapon it would carry.

Magnum Force: 9 High-Powered Pistols & Revolvers

The backside of the holster is cut so it forms a back plate of sufficient size to form a barrier between the weapon and wearer, and to provide stability to the weapon and holster. It’s also a quick and efficient way to build a holster system, a highly desired trait in times of war. The revolver is secured in the pouch by a safety strap that fastens, like the original, with a lift-dot fastener. A second strap is sewn at the bottom of the holster for securing the system to your belt.

Although originals were unlined, El Paso Saddlery offers this upgrade. The contrasting pigskin, folded and sewn along the top of its pouch, adds a nice custom touch to the holster ensemble. A slot cut horizontally into the pouch (like that of an original) allows a little extra room to accommodate the weapon’s cylinder.

Offered plain or embossed with one of several military designations (like “US,” “USAF,” “USN” or “USMC”), mine came with the most commonly encountered “US” marking. When adjusted to your individual girth, this holster is easy and quick to put on and take off, and it carries the gun comfortably and accessibly. Like all products I’ve reviewed from El Paso Saddlery, the Tanker rig is made from high-quality materials, is extremely well assembled and fits my Victory revolver like it was sewn around it.

A basic Tanker for handguns in the 3- to 5-inch barrel range costs $119, with an extra $8 if barrels are longer. The lining will add $25, and if you’re looking for something really special, you can have yours basket-, border- or fish-scale stamped or carved in a floral pattern, and those extras are priced accordingly. The 1942 Tanker is available in russet or black. Although a replica of a military holster, today’s Tanker remains a great holster for hunters, pilots and drivers.

Smith And Wesson Model 10

Still On Duty

As it turns out, “Victory” was a pretty good name for these old revolvers, and the M&P series is still available today in Smith & Wesson’s Classic line. It’s still a workhorse capable of protecting yourself and your home.

Smith & Wesson Victory Specs

Smith & Wesson Victory Performance

*Bullet weight measured in grains, velocity in fps by chronograph and accuracy in inches for best five-shot groups at 20 yards.

Smith And Wesson Model 10 Grips

For more information, visit smith-wesson.com. For more on the 1942 Tanker holster, visit epsaddlery.com.

Smith Wesson Model Number Search

This article is from “Military Surplus” 2018. To order a copy and subscribe, visit outdoorgroupstore.com.

Model 10 Revolver

The Smith & Wesson company was formed in 1852, in Norwich, Connecticut. The company's first offering was a lever-action repeating pistol. Moving forward from those beginnings, Smith & Wesson shaped innovations in the manufacturing of modern handguns. As of March 2011, Smith & Wesson offers approximately 110 different pistols of varied designs and features.

Examine the barrel of the Smith & Wesson pistol. Locate either 'Smith & Wesson, Springfield, Massachusetts' or 'Smith & Wesson; Houlton, ME' stamped on the barrel. This identification proves that the handgun is an authentic Smith & Wesson pistol.

Locate the serial number on the left side of the pistol's frame. The standard location for the serial number is above the trigger guard. Some serial numbers are located underneath the frame in front of the trigger guard. Others are on the rear of the frame, above the gun's grip.

Look up the pistol's full serial number -- including all letters and numbers -- in the back section of the 'Standard Catalog of Smith & Wesson' book. These listings inform you of the pistol's date of manufacture, based on the serial number.

Items you will need

• Smith and Wesson pistol

• Smith & Wesson catalog

• Get a basic idea of whether your Smith & Wesson pistol was manufactured at a very early date or a later date by identifying the letters from A to Z in the serial number. The letter 'A' denotes a pistol manufactured at a very early date. The letters continue on through the alphabet, for pistols manufactured at later dates.

  The numbers in the Smith & Wesson serial numbers are random numbers.

Smith And Wesson Model 34 Serial Number Lookup 2327976

Smith And Wesson Model 10 Victory Serial Numbers List

Smith & Wesson Model 34 Serial Number Lookup

• Comstock/Comstock/Getty Images